Victony US402 Extender setup

The Victony US402 extender setup is easy to set up. Connect the extender to a power outlet close to your router first. Use your device to establish a WiFi connection with the extender. Next, launch a web browser and type 192.168.10.1, or ap.setup by default. Use the default username and password to log in, which are often admin for both. Choose your current WiFi network and expand it by following the setup tutorial. After adjusting the parameters, watch for the extender to restart. In order to guarantee ideal coverage, check the strength of the WiFi signal in wider areas.

Victony US402 Wifi Range Extender setup-Manual Guide

1. Connect to the network of the Victony US 402 WiFi Extender by plugging it in.
2. 192.168.10.1 or ap.setup should be entered in the address bar of an open internet browser.
3. Use the default login information.
4. To extend your current WiFi network, choose it and follow the on-screen instructions.
5. If necessary, apply the settings and watch for the extender to reboot.
6. To make sure WiFi is covered in large regions, check the strength of the signal.

Note:_ If you need any assistance regarding your wavlink wing 12m wifi extender login so contact our technician or visit the official website that is Victony US402 Wifi Extender setup 

Common issue for victony us402 setup

• Before starting the setup procedure, make sure your device is linked to the extender’s default WiFi network, such as “Victony_EXT”.
• If you are unable to locate the network.
• restart both your device and the extender.
• Open a web browser and enter the default or web address) after creating a link to the extender’s network.
• If the login page isn’t loading.
• try clearing the cache in your browser or using a new one.
• Both the password and the username by default are frequently 
• Take care while adding them to account for case sensitivity.
• Weak Signal 
• For a stronger signal, place the extender halfway between your router and the desired area.

Useful feature of victony us402 wifi extender setup

1. A quick and simple setup method is made possible by the Wi-Fi Protected Setup (WPS) button. 
2. You can connect your router and extender without providing a password by hitting the WPS button on each of them.
3. The LED signal indicator assists you to decide where the extender needs to be placed.
4. It lets you know how strong the signal is coming from the router so you can position the extender to optimise the range of WiFi coverage.
5. With support for both the 2.4GHz and 5GHz bands.
6. The US402 offers greater efficiency and reduced interference. 
7. On the demands of the device and its distance from the extender.
8. you can connect it to a suitable band

Victony US402 Wifi Extender setup-WPS Guide

1. The Victony US402 Extender should be connected in and placed close to your router.
2. On the extender, press the WPS button.
3. Press the WPS button on your router within two minutes.
4. Hold off until the extender’s WPS LED stops blinking and solid.
5. If needed, move the extender to provide better coverage.
6. WPS is now configured on your Victony US 402 WiFi Extender.

How do I login to Victony US402?

1. Join the WiFi network of the Victony US 402 extender.
2. Launch a web browser.
3. Enter 192.168.0.1 or 192.168.1.1 in the address bar.
4. If prompted, log in with the default password and username.
5. Go to the login screen.
6. Put in your credentials.
7. Victony US 402 is now open to you.

How do I update the Victony US402 Extender Firmware?

1. Go to the Victony website and get your extender’s most recent firmware.
2. Link into the WiFi network of the extender.
3. 192.168.0.1 or 192.168.1.1 should be typed in the address bar of an open internet browser.
4. Go to the settings page of the extender.
5. Go to the area for firmware updates.
6. Upload the firmware file that you downloaded.
7. To finish the update, follow the displayed instructions.

Victony US402 Extender-Reset process

1. Find your Victony US402 extender’s reset button.
2. For 10 or 15 seconds, tap the reset key.
3. When the LED lights begin to blink, release the reset button.
4. Await the reboot and factory reset of the extender.
5. Adjust the settings of your extender as necessary.
6. The reset of your Victony US 402 extender has been completed.